Peg Bag Tutorial

This is my old peg bag.  It’s looking more than a little bit sad!  It’s had a busy life and it’s even busier now we have the little person, but as it was only a few £s in Sainsbury’s several years ago it has done very well.

This is the fabric for the new bag!  Bright and cheerful and from Ikea – I’m sorry I can’t tell you what it’s called, it was part of a bundle of remnants bought on eBay.   It’s a home dec weight material and has a soft canvas texture.  The lining is going to be  some plain red cotton that I’ve got lurking in my stash.

The design is quite simple and similar in shape to the old bag with a few tweaks, the biggest being that it is going to be lined.  This is going to be a luxurious bag for the pegs to live in when they’re not doing their peggy thing!  I’m hoping it’ll mean that it lasts a bit longer too…

I’m going to make it a bit bigger too as I want a larger hole to get the husband sized hands in and so that I can get more pegs into the bag.  We have an insane washing machine that will wash 9kg of laundry per wash, which is a lot, and our line will hold two of these washes!  If it’s all towels and sheets, that’s fine.  When it’s all socks and pants that’s not so good because you need a LOT of pegs, so a bigger bag is the way to go…

I’m also going to square off the bottom of the bag as I like the depth it will add, this is personal preference though and completely up to you!

I’m plannig to re-use the hanger from the old bag but you could always use a child-sized hanger.  Asking in your local supermarket (if in the UK) if they’ve got any destined for the bin is always an option if you don’t have stock from your own small person, or ask someone who does have a small person if you could have one of theirs (hangers, that is…)!  You can buy small hangers, but it makes sense to recycle them where possible.

What I used:
Hanger
Focus Fabric
Lining Fabric

If you’re using lighter weight fabric for the focus fabric on the outside of the bag, you may want to use some interlining to add some strength.  I’d suggest a medium weight woven fusible one.

  • First, decide on your bag size, this depends on the hanger width and how deep you want the bag to be, plus the seam allowance. 
    I wanted my finished bag to be 10″ by 14″ (before I square off the bottom) and my seam allowance is 1/2″, so I need my pieces of fabric to be 11″ by 15″.  
  • Cut two rectangles of this size from the focus, and the lining fabric.  Decide on which will be the top edge and mark the centre.  Make two further marks 3/4″ either side of the centre mark – this will be the gap where you thread the hanger’s hook through, so adjust as necessary!
Outline for my hand hole
  • Pin one of the focus and one of the lining fabrics RST (Right Sides Together) and then draw an oblong where you want the hole to be, making sure that it is centred and square. 
    My oblong is 2 1/2″ down from the top and 3″ from each size.  I’ll have a hole that is 4″ by 5″.  I’ve used disappearing marker to draw on the fabric.
Outline stitched and envelope pattern drawn, ready for cutting...
  • Next, stitch along the line you’ve just drawn as the oblong’s outline and iron the stitches to set them.
  • Then draw an envelope type pattern inside the oblong and carefully cut along these lines up to but not through the stitches around the edge. 
    I also trimmed out some of the excess fabric, making sure to leave at least 1/2″.
Lining pulled through and ironed
  • Push the lining fabric through the hole you’ve just made so that the focus and lining fabric are now WST (Wrong Sides Together).  Manipulate the edges of the hole so it’s lovely and neat and iron so you have a nice crisp edge. 
Top Stitching around the hole
  • I then pinned the two pieces together at the edges and top stitched about 1/4″ from the edge of the hole to help hold the layers and add some strength.
  • Pin the second piece of lining fabric to the first RST.  You’ll need to hold the focus fabric out of the way as you stitch the two pieces together:
    Starting at the right hand side of where the gap will be for the hanger hook to poke through, stitch around the edge of the fabric in a clockwise direction. 
Can you see the longer stitches after the back-stitching?
  • On the bottom edge after stitching a couple of inches of the bottom seam, back-stitch a little then lengthen your stitch length before sewing about 3-4″.  Shorten your stitch length again sew a few stitches, back-stitch then carry on along the bottom and up the side and across the top, back-stitching again just before the hole for the hanger hook.  Iron the seams to set the stitches then iron the seams open.
  • Square off the bottom by pinching the bottom corner flat so that the bottom and side seams line up.  Pin to hold this in place.
Measured, drawn and stitched to make a flat bottom and a 3D peg bag
  • Measure 1″  up from the corner along the seam and then draw a perpendicular line to the seam at this mark.  Sew along this line and cut away the excess fabric at the corner.  Repeat for the other corner then cut away your long stitches in the bottom seam.
  • Pin the second piece of focus fabric to the first, RST.  Make sure the lining is out of the way.
I'm pointing at the hole for the hanger's hook - don't stitch between the pins!
  • Starting at the right hand side of where the gap will be for the hanger hook to poke through, stitch around the edges of the fabric in a clockwise direction.  Back-stitch again just before the hole for the hanger hook.  Iron the seams to set the stitches then iron the seams open.
  • Square off the bottom of the bag as per the lining and clip the top corners of the focus fabric.  This will make sure you have sharp corners when you turn it the right way out.
  • Turn the bag the right way out by reaching up through the gap in the lining and grabbing the outer bag through the hole for your hand.
  • Slip stitch the gap closed in the lining.  Keyka Lou has some really good instructions on how to slip stitch.
  • Poke the lining fabric through the hole where your hand will go to grab the pegs and arrange inside the outer bag so it’s nice and neat.
Threading the hanger through
  • Put your hanger through the hole and thread its hook out of the gap at the top.
A funky new home for my pegs!

Ta Dah!  One very plush place for your pegs to live!  Believe it or not, this has the same number of pegs in it as the old bag so I’ve got lots of room to add more…

Advertisements

4 thoughts on “Peg Bag Tutorial

  1. what sort of fabric do you need because i am making a peg bag for my mum at school in textiles and i need to know what sort i will need thank you

    1. I’d go with a home decorator canvas style fabric as it’ll be stronger and have a bit more body to it. You should be able to find it in the curtains and cushion covers bit of a department store (like John Lewis), or a specialised interiors store. Searching online or on eBay would also be a possible solution. The fabric I used on the outer of mine was an offcut of Ikea fabric. The lining is just plain cotton. I hope that helps and if you’ve got any other questions, please let me know and I’ll try to help.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s