OK, for a long while I thought you said plaid so that it rhymed with fade. Apparently it rhymes with fad!
Yesterday evening I cut out my circle skirt and I thought I’d share how I (hope I’ve) matched the plaid design on the pattern. And I unashamedly credit the Selfish Seamstress herself in educating me in this method…
First I used my paper pattern piece to cut through one thickness of the cloth. I then matched this cut piece over the rest of my fabric, carefully pinning so that the lines ran seamlessly across the cut and uncut piece.
I hope the above photo helps. They say a picture is worth a thousand words?! I used a LOT of pins around the outer curve, the waist line and each straight edge! I tried taking an over view photo showing the whole cut piece overlaid on the fabric but it just looked like a big bit of fabric with my magnetic pin cushion plonked in the middle of it!
The Selfish Seamstress does a much more thorough explanation of this, please go and have a look if this is something you want to do. I also checked out the tutorial on Coletterie which focused on stripes.
One thing though, I have not unpinned my two skirt pieces! They’re staying pinned together until it’s time to do the seams as I think my head will explode if I have to match it all up again, and the fabric is very fluid and shifts quite easily. But thinking about it, I’ve got a right side and a wrong side together so I’m going to have to!!!! Definitely a job for another evening. I’m not sure either that I’ll get a chevron effect on the seams as they’re parallel to the selvedges – instead the pattern just wont be interrupted? I can’t envisage it at the moment, so I guess time will tell!
I’m going to have to think about the seam finishes too as the fabric seems to fray quite easily. I’d decided not to line the skirt, but due to the fluidity of it I’m wondering whether a lining might save it from being pulled out of shape when I sit in it. Last thing I want is a saggy bit of circle skirt over the derrier!